Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

An approach to characterization of the agricultural self-propelled machines stability

This paper presents an analytical algorithm with appropriate software specified for the approximation of the allowed critical slope of the solid flat terrain that guarantees static and/or dynamic stability of the specified self-propelled agricultural machines and their aggregates. This algorithm assumes machine as a rigid body, having 3 or 4 contact points (defined by wheels or crawlers), under uniform motion at different constant velocities and radii of curvature trajectories. Using this algorithm, based on the principles of theoretical mechanics combined with 3D analytical geometry, the computer program SSPM (stability of the self-propelled agricultural machines) has been coded. This software is intended to facilitate the analysis, comparison and optimization of different configurations of self-propelled agricultural machines in operation on horizontal and sloped flat terrains at constant velocities and radii of trajectory with respect to their static and dynamic stability. It calculates critical pitch and roll angles of the self-propelled machine and the maximum allowed slope of the flat terrain under the given conditions. The algorithm and the appropriate SSPM software were experimentally verified using the platform and low-scale tractor model. Average difference between calculated and experimental critical values of roll and pitch angles were about 4°     

Ce掺杂CrSi2电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及Ce掺杂CrSi2的电子结构和光学性质进行理论计算。计算结果表明，未掺杂CrSi2是间接带隙半导体，其禁带宽度为0.392 eV，掺杂Ce元素，仍然是间接半导体，带隙宽度下降为0.031eV。未掺杂CrSi2在费米能级附近主要由Cr-5d、Si-3p态贡献。Ce掺杂后在费米能级附近主要由Cr-5d轨道，Ce-4f轨道，C-2p，Si-3p轨道贡献，掺杂后电导率提高。未掺杂CrSi2有两个介电峰，掺杂后，只有一个介电峰。未掺杂CrSi2，在能量为6.008处吸收系数达到最大值，掺杂后在能量为5.009eV处，吸收系数达到最大值。     

Influence of solvent on solution processed Cu2ZnSnS4 nanocrystals and annealing induced changes in the optical,structural properties of CZTS film

The well-known quaternary Cu₂ZnSnS₄ (CZTS) chalcogenide thin films are playing an important role in modern technology. The CZTS nanocrystal were successfully prepared by solution method using water, ethylene glycol and ethylenediamine as different solvent. The pure phase material was used for thin film coating by thermal evaporation method. The prepared CZTS thin films were characterized by XRD, Raman spectroscopy, FESEM, XPS and FT-IR spectroscopy. The XRD and Raman spectroscopy analysis revealed the formation of polycrystalline CZTS thin film with tetragonal crystal structure after annealing at 450 ^°C. The oxidation state of the annealed film was studied by XPS. A direct band gap about 1.36 eV was estimated for the film from FT-IR studies, which is nearly close to the optimum value of band gap energy of CZTS materials for best solar cell efficiency. The CZTS annealed thin films are more suitable for using as a p-type absorber layer in a low-cost solar cell.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

La单掺4H-SiC电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及La掺杂4H-SiC的电子结构和光学性质进行理论计算。计算结果表明，未掺杂4C-SiC其禁带宽度为2.257 eV。La掺杂后带隙宽度下降为1.1143eV，导带最低点为G点，价带最高点为F点，是P型间接半导体。掺杂La原子在价带的低能区间贡献比较大，而对价带的高能区和导带的贡献比较小。未掺杂4H-SiC在光子能量为6.25 eV时，出现一个介电峰，这是由于价带电子向导带电子跃迁产生。而La掺杂后，出现3个介电峰，分别对应的光子能量为0.47eV、2.67eV、6.21eV，前两个介电峰是由于价带电子向杂质能级跃迁产生，第三个介电峰是由于价带电子向导带电子跃迁产生。La掺杂后4H-SiC变成负介电半导体材料。未掺杂4h-SiC的静态介电常数为2.01，La掺杂的静态常数为12.01。     

Non-Abelian gauge potentials driven localization transition in quasiperiodic optical lattices

Derived from quantum waves immersed in an Abelian gauge potential, the quasiperiodic Aubry-André-Harper (AAH) model is a simple yet powerful Hamiltonian to study the Anderson localization of ultracold atoms. Here, we investigate the localization properties of ultracold atoms in quasiperiodic optical lattices subject to a non-Abelian gauge potential, which are depicted by non-Abelian AAH models. We identify that the non-Abelian AAH models can bear the self-duality. We analyze the localization of such non-Abelian self-dual optical lattices, revealing a rich phase diagram driven by the non-Abelian gauge potential involved: a transition from a pure delocalization phase, then to coexistence phases, and finally to a pure localization phase. This is in stark contrast to the Abelian counterpart that does not support the coexistence phases. Our results establish the connection between localization and gauge symmetry, and thus comprise a new insight on the fundamental aspects of localization in quasiperiodic systems, from the perspective of non-Abelian gauge potential.